Iimveliso

I-Metal abrasive-Phucula uMfanekiso oQinisekisiweyo wokuGqibela uMphezulu

I-Metal abrasive-Enhance Surface Finishing

I-Metal abrasive yinto ebukhali kwaye ilukhuni esetyenziselwa ukucola umphezulu wezinto ezithambileyo, kwaye yinto yonyango lwesinyithi kwimigangatho yomatshini.

Iibrasives zentsimbi ikakhulu zibandakanya: ukudubula kwentsimbi, igrit yentsimbi, ukudutyulwa kwentsimbi, ukudutyulwa kwentsimbi, ukudutyulwa kwentsimbi, igrit yentsimbi, njl.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Cast Steel Shot

Ukucoca: Ukuqhushumba kweembumbulu, ukuqhushumba kweembumbulu, ukucocwa kokudubula, ukuqhushumba kweembumbulu, ukuqhushumba kweembumbulu, ukuqhushumba kweembumbulu, ukucocwa kwesanti, ukucocwa kwepleyiti yentsimbi, ukucocwa kwentsimbi, ukucocwa kwe-H-beam, ukucocwa kwesakhiwo sentsimbi.
Ukususwa komhlwa: ukuqhushumba kweembumbulu, ukuqhushumba kweembumbulu, ukuphosa, iipleyiti zentsimbi, iingcingo, intsimbi, imiqadi ye-H, kunye nezakhiwo zentsimbi.
Ukomeleza: ukuchama, iindawo zokunyanga ubushushu, ukuchama, ukuchama.
Ukukroba kwentsimbi: ukukroba kwentsimbi, ukuqhushumba kwentsimbi, ukuqhushumba kwepleyiti yenqanawa, ukukroba kwentsimbi, ukukroba kwentsimbi.
Ukudubula kwentsimbi: ukuqhushumba kwepleyiti yentsimbi, ukuqhushumba kweentsimbi, ukudutyulwa kweentsimbi.
Sanding: unyango sanding.
I-Steel shot pretreatment: i-pre-painting treatment, i-coating pre-treatment, i-surface-pre-treatment, i-plate ye-ship pre-treatment, i-section steel pre-treatment, i-steel pre-treatment, i-plate yensimbi yonyango, i-steel structure pre-treatment.

Cast Steel Grit

I-Steel Shot (i-Steel Shot) eyaziwa njenge-Cast Steel Grit (i-Cast Steel Grit) I-Steel abrasives (i-Steel Abrasives), isanti ye-angular yindawo ephuculweyo yesanti yentsimbi kunye nesanti yentsimbi, ekwaziwa njenge-shot blasting abrasive, i-shot blasting machine abrasive, Izinto ezidubulayo ezidubulayo, izixhobo zokuqhushumba, iziqhushumbisi ezidubulayo, iziqhushumbisi ezitshatyalaliswayo, izinto ezitshatyalaliswayo, izinto ezitshatyalaliswayo, iziqhushumbisi zomatshini wokuqhumisa, iziqhushumbisi ezidubulayo, izixhobo zokuqhushumba, iziqhushumbisi ezisusa umhlwa, iziqhushumbisi zentsimbi, iziqhushumbisi zentsimbi. ukuqhushumba, ukudubula peening ukomeleza abrasives zentsimbi, njl.

Stainless Steel Shot

Stainless shot shot Intsimbi engatyiwayo.

Ukudutyulwa kwentsimbi ngokuqhelekileyo kwaziwa ngokuba yintsimbi engenastainless wire cut shot, esulungekiswa ngokuzoba ucingo, ukusika, ukungqungqa kunye nezinye iinkqubo.Eziqaqambileyo, azina mhlwa, ezimilise ngamaso (i-pellets esikiweyo, icylindrical).

IiParameters zeMveliso

Inombolo yeSieve	intshi	Indawo yekhusi	Ibhola yentsimbi yeSAEJ444
Inombolo yeSieve	intshi	Indawo yekhusi	S930	S780	S660	S550	S460	S390	S330	S280	S230	S170	S110	S70
6	0.132	3.35	AllPass
7	0.111	2.80		AllPass
8	0.0937	2.36	≥90%		AllPass
10	0.0787	2.00	≥97%	≥85%		AllPass	AllPass
12	0.0661	1.70		≥97%	≥85%		≤5%	AllPass
14	0.0555	1.40			≥97%	≥85%		≤5%	AllPass
16	0.0469	1.18				≥97%	≥85%		≤5%	AllPass
18	0.0394	1.00					≥96%			≤5%	AllPass
20	0.0331	0.850							≥85%		≤10%	AllPass
25	0.0280	0.710							≥96%	≥85%		≤10%
30	0.0232	0.600								≥96%	≥85%
35	0.0197	0.500									≥97%
40	0.0165	0.425										≥85%		AllPass
45	0.0138	0.355										≥97%		≤10%
50	0.0117	0.300											≥80%
80	0.007	0.180											≥90%	≥80%
120	0.0049	0.125												≥90%
200	0.0029	0.075
GB(iyunithi:mm)			2.8	2.5	2.0	1.7	1.4	1.2	1.0	0.8	0.6	0.4	0.3	0.2

Iprojekthi		Ukudubula kwentsimbi okusemgangathweni kuzwelonke	Ukudubula kwentsimbi esemgangathweni
Ukwakheka kweekhemikhali%	C	0.85-1.20	0.85-1.0
	SI	0.40-1.20	0.70-1.0
	Mn	0.60-1.20	0.75-1.0
	S	<0.05	<0.030
	P	<0.05	<0.030
Ukuqina	ibhola yentsimbi	HRC40-5HRC55-62	HRC44-48 HRC58-62
Ukuxinana	ibhola yentsimbi	≥7.20g/cm3	7.4g/cm3
Umbutho weMetallographic		I-martensite epholileyo okanye i-troostite	Ubushushu bemartensite + bainite isakhiwo esintsonkothileyo
Umphandle		ibhola engqukuva amasuntswana angenanto<10% Amaqhekeza amaqhekeza<15%	ibhola engqukuva amasuntswana angenanto<5% Amaqhekeza amaqhekeza<10%

Igama		Igrit yentsimbi
Ukuqulunqwa kweekhemikhali	C	0.70- 1.2%
	Mn	0.60- 1.2%
	SI	040- 1.2%
	S	≤0.05%
	P	≤0.05%
Ubunzima obuphakathi (500gnuclear load assay)
Ukunxaxha kobunzima		Uluhlu oluphezulu lokutenxa yi-3.0HRC okanye i-40HV
Umbutho weMetallographic		Iyunifomu ye-martensite enobushushu okanye i-troostite epholileyo + i-dispersed carbide
Obona xinaniso lusezantsi (kumiselwa indlela yokutshintsha utywala)		7.4g/cm³